EGR Motor -V338-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the EGR Cooler Switch-Over Valve -N345- -arrow- from the bracket.

Fig 1: Identifying EGR Cooler Switch-Over Valve -N345- -Arrow- And Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamp -arrow- and remove the coolant hose.

Fig 2: Locating The Clamp -Arrow- And Remove The Coolant Hose.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connector -1-.

-- Remove the screws -arrows- and the EGR Motor -V338-.

Fig 3: Identifying Bolts -Arrows- And EGR Motor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.