LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1240 (Cooling System [CATA]) >> 19 Cooling System >> Coolant System >> Coolant Pipes, Removing And Installing >> Upper Coolant Pipe, Removing And Installing >> Removing

Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING .

-- Remove the oil cooler. Refer to OVERVIEW - ENGINE OIL COOLER, PRESSURE REGULATOR VALVE AND OIL FILTER HOUSING .

-- Loosen the clamp -2- and remove the coolant hose.

Fig 1: Identifying Hose Clamp -2-
GWWA19-10538Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Ignore -item 1- and -arrow-.

-- Remove the front coolant pipe from cylinder block.