Left Coolant Pipe, Removing And Installing: Removing

Fig 1: Identifying Bolts -1 & 2- And Electrical Connector -3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -3-.

-- Remove the screws -1 and 2-, remove the Throttle Valve Control Module -J338- from the intake tube.

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Using a Wrench - Pin Type:3212  as a counterholder, remove the bolts -arrows- and remove the power steering pump ribbed belt pulley.

Fig 2: Identifying Spanner Wrench 3212 And Bolts -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 and 2-.

Fig 3: Identifying Power Steering Pump Bolts -1 And 2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the power steering pump and tie it upward.

-- Remove the A/C compressor. Refer to Air Conditioning .

-- Remove the bolt -2- from the guide tube.

Fig 4: Identifying Ribbed Belt Tensioner Bolt -1- And Oil Dipstick Guide Tube Bolt -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ribbed belt tensioning element bolt -1-.

-- Drain the coolant. Refer to COOLANT, DRAINING .

-- Loosen the clamp -1- and remove the coolant hose from the left coolant pipe.

-- Remove the bolts -4 and arrows- and remove the accessory assembly bracket.

-- Loosen the clamp -3- and remove the coolant hose from the left coolant pipe.

-- Remove the bolt -2- and remove the left coolant pipe from the bracket.

Fig 5: Identifying Clamp -1- To Coolant Hose, Bolts -2 & 4- And Clamp -3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.