Thermostat With Connection, Removing And Installing: Installing
WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while Noting The Following:
NOTE:
Replace the O-ring.
-- Clean the sealing surfaces.
-- Install the thermostat with the connection, bolt tightening specification: 9 Nm.
-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Fill with coolant. Refer to COOLANT, FILLING .