Front Coolant Pipe, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Clean or smooth O-rings sealing surface before installing.
-- Replace seals and O-rings.
-- Coat the seals and O-rings with coolant and then slide them onto the coolant pipe.
Install in reverse order of removal, Note The Following:
- Tightening specifications. Refer to OVERVIEW - COOLANT PIPES .
- Secure all hose connections with hose clamps that are specific to that model. Refer to the Parts Information.
- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
- Fill with coolant for the high temperature coolant circuit. Refer to COOLANT, DRAINING AND FILLING, HIGH TEMPERATURE CIRCUIT .