Compressor Coolant Pipes, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
- Tightening specification. Refer to OVERVIEW - COOLANT PIPES .
- Replace the seals.
- Secure the hose connections with hose clamps that are specific to that model. Refer to the Parts Information.
- Fill with coolant for the low temperature coolant circuit. Refer to COOLANT, DRAINING AND FILLING, LOW TEMPERATURE CIRCUIT .
- Install the noise insulation. Refer to NOISE INSULATION .