Brake Shoes, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- T-Handle Hook:3438
Install In Reverse Order Of Removal.
Additional work:
Greasing the Brake Shoe Ridge and Parking Brake Motor Mount arrows :
-- Coat the brake shoe ridge -1- and the parking brake motor mount -2- at the sliding and side surfaces with hot bolt paste G 052 112 A3.
WARNING:
No grease must get on the friction surfaces of the brake shoes and brake drum!
-- Afterwards, perform the basic setting for the electro-mechanical parking brake.
Connect the :Vehicle Diagnostic Tester and select the function. Refer to , CONNECTING AND SELECTING FUNCTIONS .