Lift Cylinder For Spray Nozzles, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If the hose between both lift cylinders is being replaced, be sure it is clipped securely into the hose brackets on the bumper cover.

-- Tighten the bolts for the telescopic cylinder on the bumper cover to 2 Nm.

-- Bleed headlamp washer system after completing assembly work. Refer to HEADLAMP WASHER SYSTEM, BLEEDING .