Headlamp Washer System, Bleeding
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
After assembly work or when first operating, headlamp cleaning system must be ventilated to ensure proper function.
-- Fill the washer fluid reservoir.
-- Start the engine.
-- Switch the headlamps to "ON".
-- Operate headlamp cleaning system several times (3-5 impulses for every 3 second period).
-- If necessary, repeat this ventilation procedure until proper function of lift cylinders and spray nozzles is obtained.