Component Location Front On Engine

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Component Location Front on Engine

Courtesy of AUDI OF AMERICA, LLC

1 - Right high pressure pump (cylinder bank 1)

2 - Variable Intake Manifold Runner Motor -V183-

3 - Intake Flap Motor -V157-

4 - Left high pressure pump (cylinder bank 2)

5 - Intake Manifold Runner Position Sensor 2 -G512-

6 - Electrical connector from Knock Sensor (KS) 4 -G199-

7 - Electrical connector from Knock Sensor (KS) 3 -G198-

8 - Oil pressure switch -F1-

9 - Electrical connector from Knock Sensor (KS) 2 -G66-

10 - Electrical connector from Knock Sensor (KS) 1 -G61-

11 - Intake Manifold Runner Position Sensor -G336-

Beginning in MY 2009, items -2 and 3- have been replaced by vacuum-controlled valves.

The Variable Intake Manifold Runner Motor -V183- has become the Intake Manifold Tuning Valve -N156-.
The Intake Flap Motor -V157- has become the Intake Manifold Runner Control Valve -N316-.