Secondary Air Injection Left Combination Valve, Removing And Installing, Market-Specific 2: Installing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening Specification. Refer to OVERVIEW - SECONDARY AIR SYSTEM, MARKET-SPECIFIC 2 and Figure.

Install In Reverse Order Of Removal. Note The Following:

NOTE:

Replace The Seal.

-- Install The Left Catalytic Converter. Refer To LEFT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install The Plenum Chamber Bulkhead. Refer To OVERVIEW - PLENUM CHAMBER BULKHEAD .