Auxiliary Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Guide -1

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Removal and installation is shown on the right auxiliary cooler on the Audi RS5 Coupe.

-- Drain the coolant. Refer To COOLANT, DRAINING AND FILLING .

-- Remove The Front Bumper Cover. Refer To OVERVIEW - BUMPER COVER, AUDI RS5 /BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

-- Unclip the affected air guide -1-.

-- Loosen the nuts -1-.

Fig 2: Loosening Clamps -Arrows-, Lower Auxiliary Cooler Slightly & Remove Coolant Hoses

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

-- Remove the bolts -3- and bracket -4-.

-- Loosen the clamps -arrows-, lower the auxiliary cooler slightly and remove the coolant hoses.