Oil Spray Jets/Valves, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

Tightening specifications. Refer to OVERVIEW - OIL SPRAY JETS/VALVES .

NOTE:

Replace The Seals And The O-Rings.

Replace any bolts that were tightened with an additional turn.

-- Install the high pressure line and the intake manifold upper section. Refer to HIGH PRESSURE PIPE, REMOVING AND INSTALLING and INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .