Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.Note The Following:

Tightening Specification. Refer to OVERVIEW - RADIATOR/COOLANT FAN .

NOTE:

If there are small impressions on the fins. Refer to COOLER AND CONDENSER ASSEMBLY .

-- Install the bumper and the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Install the air duct on the air filter housing intermediate flange. Refer to OVERVIEW - AIR FILTER HOUSING .

-- Fill with coolant. Refer to FILLING .

NOTE:

All of the coolant must be changed if the radiator was replaced.