Left Combination Valve, Removing And Installing, With Vacuum Control: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

Tightening Specification. Refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM WITH VACUUM CONTROL .

NOTE:

Replace The Seals And The O-Rings.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

When installing, bring all cable ties back to same positions.

-- Install the plenum chamber bulkhead. Refer to OVERVIEW - BULKHEAD .