Oil Spray Jets/Valves, Removing And Installing: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
- Tightening Specifications. Refer to OVERVIEW - OIL SPRAY JETS/VALVES .
NOTE:
Replace The Seals And The O-Rings.
-- Install the high pressure lines. Refer to HIGH PRESSURE PIPE, REMOVING AND INSTALLING .
-- Install the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .