LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lighting (1 Of 2)) >> Diagnosis And Testing >> Headlamps >> Pinpoint Tests >> Pinpoint Test R : B103C:01, B103C:55, B103C:96, B103D:01, B103D:55, B103D:96 >> Notes

Pinpoint Test R : B103C:01, B103C:55, B103C:96, B103D:01, B103D:55, B103D:96: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagram Headlamps/Autolamps for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Exterior Lighting - Overview .

REFER to: Exterior Lighting - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B103C:01 Left Headlamp Control: General Electrical Failure A continuous memory and on-demand DTC that sets when the HCM receives a headlamp or general LED control module fault message from the LED control module over the LIN.
B103C:55 Left Headlamp Control: Not Configured A continuous memory and on-demand DTC that sets when the HCM receives a message from the LED control module over the LIN that the LED control module has not been configured.
B103C:96 Left Headlamp Control: Component Internal Failure A continuous memory and on-demand DTC that sets when the HCM receives a message from the LED control module over the LIN that there is a failure with headlamp assembly internal components.
B103D:01 Right Headlamp Control: General Electrical Failure A continuous memory and on-demand DTC that sets when the HCM receives a headlamp or general LED control module fault message from the LED control module over the LIN.
B103D:55 Right Headlamp Control: Not Configured A continuous memory and on-demand DTC that sets when the HCM receives a message from the LED control module over the LIN that the LED control module has not been configured.
B103D:96 Right Headlamp Control: Component Internal Failure A continuous memory and on-demand DTC that sets when the HCM receives a message from the LED control module over the LIN that there is a failure with headlamp assembly internal components.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks