Gap Cover, Replacing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Windshield
- Removed
- Gap Cover
-- Adhering, GAP COVER, REPLACING - Installing the Gap Cover .
-- Before installing new gap cover, remove residue completely using a commercially available window scraper to avoid damaging ceramic screen printed area.
-- Clean adhesion area with cleaning solution :D 009 401 04 .
-- Apply a mark on the window interior using, for example, a soft pencil at a distance -a- = 8 mm from upper window edge.
-- Prime the adhesive surface with :D 009 200 02 up to mark applied earlier and let it air dry for at least 10 minutes.
-- Press the gap cover onto the glass starting in the middle with the rear edge facing the primer end (pencil marking).
-- Reinstall the window glass.