Installing the Gap Cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Windshield -1- with ceramic coating.
-- Clean the adhesive surface with cleaning solution :D 009 041 04 .
-- Now apply a marking at uniform distance -a- = 8 mm to top of window edge.
-- Apply glass/paint primer :D 009 200 02 cleanly up to marking.
-- Let the glass/paint primer air out for at least 10 minutes.
-- Remove the protective foil from double-sided adhesive tape -3-.
-- Place the gap cover -2- in the center and onto the window glass with the rear edge facing the primed end (marking).
-- Press the profile firmly onto window glass using a roller.