Overview - Rear Lid, Sedan

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Lid Components Location

Courtesy of AUDI OF AMERICA, LLC

Rear Lid
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING, SEDAN .
Stop Strip
Adjusting Buffer
- Adjusting. Refer to REAR LID, ADJUSTING, ADJUSTING BUFFER, SEDAN .
Rear Lid Latch
- Removing and Installing. Refer to REAR LID LOCK, REMOVING AND INSTALLING, SEDAN .
Nut
- 21 Nm
Spring
- Attachment points, refer to TENSION SPRING, REMOVING AND INSTALLING, SEDAN - Spring Engaging Points .
Lid Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING, SEDAN .
Nut
- 21 Nm
Bracket
Nut
- 21 Nm
Bolt
- 21 Nm
Bolt
- 21 Nm
Rear Lid Motor 1 -V444-
- Removing and Installing. Refer to Rear Lid Motor 1 -V444-, REMOVING AND INSTALLING, SEDAN .
Side Stop
- Removing and Installing. Refer to SIDE STOP BUFFER, REMOVING AND INSTALLING, SEDAN THROUGH MODEL YEAR 2014 .