Spring Engaging Points
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- SpringNOTE:
Pay attention to the spring engaging direction to the hinge bolt.
-- Attach the left spring to the short eye by engaging the hook starting at the bottom and then upward.
-- Attach the right spring to the short eye by engaging the hook starting at the top and then downward.
-- Then engage the spring on the body side to the long eye on the engaging point -b-.
- Rear Lid Hinge
- Cover
- To install, push the cover forward until it locks secure on the hinge bolt.