Data Memory, Checking

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Warning information for the high voltage system:

For procedures where the ignition must be switched on, refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED ON .

-- Follow these steps in sequential order.

Connect VAS 50XX/60XX. Refer to Vehicle Diagnostic Tester .
Vehicle - OBD
Gateway - Device
Read the control module with the fault stored in the DTC memory.
Correct relevant malfunctions with customer approval.