Vibration Damper, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

Tightening specifications:

Refer to OVERVIEW - RIBBED BELT DRIVE FOR VEHICLES WITH HYDRAULIC POWER STEERING .
Refer to OVERVIEW - RIBBED BELT DRIVE FOR VEHICLES WITH ELECTRO-MECHANICAL POWER STEERING .

NOTE:

Replace the bolts that were tightened with an additional turn.

Installation is only possible in one position because of the offset holes.

-- Install the radiator bracket and radiator. Refer to OVERVIEW - RADIATOR/COOLANT FAN .

-- Install the bumper cover end plate. Refer to Removing and Installing .

-- Install the left front coolant pipes. Refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Installing the ribbed belt: