Supercharger Ribbed Belt, Removing And Installing: Removing

Fig 1: Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1- upward.

-- Remove the front noise insulation -1-. Refer to Front Noise Insulation Removing And Installing .

Fig 2: Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damage due to reversed running direction on a used ribbed belt.

Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

-- Pivot the tensioner clockwise in direction of -arrow- to release the tension on the ribbed belt.

Fig 3: Remove The Ribbed Belt And Secure The Tensioning Element With T10060 A.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt and secure the tensioning element with Locking Pin T10060A.