Front Noise Insulation Removing And Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Fig 1: Identifying Bolts -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the bolts -arrows- for the front wheel housing liner connection -1- and the front wheel spoiler.

Fig 2: Identifying Bolts -Arrows- For Front Wheel Housing Liner Connection -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the quick release -arrows-.

-- Remove the front noise insulation -1- toward the rear and out of the lower section of the bumper cover.

The guide tabs for the front noise insulation will disengage while doing this.

-- Remove the front noise insulation.

Fig 3: Identifying Quick Release -Arrows- And Front Noise Insulation -1-

Courtesy of AUDI OF AMERICA, LLC

Installing

Tightening specification. Refer to OVERVIEW - NOISE INSULATION, AUDI RS 4 .

Install in reverse order of removal.