Ribbed Belt, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Installing

Fig 1: Identifying Ribbed Belt Routing And Pulley Arrangement -1 To 6-

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

• Tightening specification: Refer to OVERVIEW - SUPERCHARGER RIBBED BELT DRIVE .

-- Place the ribbed belt over the pulley as illustrated.

1. Generator
2. Idler roller
3. Coolant pump
4. A/C compressor
5. Ribbed belt tensioner
6. Vibration damper

-- Install the left front coolant pipes. Refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Start the engine and check the belt routing.

-- Install the supercharger ribbed belt. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .