Overview - Supercharger Ribbed Belt Drive
- Supercharger Ribbed Belt
- Check for wear
- Removing and installing. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .
- When installing, make sure it is seated correctly on the ribbed belt pulleys
- Bolt
- 40 Nm
- 37 Nm when using Wrench - Door Adjusting 3320
- Washer
- Cover
- Supercharger
- Refer to OVERVIEW - SUPERCHARGER .
- Idler Roller for Ribbed Belt
- Vibration Damper
- With double ribbed belt pulley
- Installation is only possible in one position because of the offset holes
- Removing and installing. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 20 Nm +90° turn
- Ribbed Belt Tensioner
- Removing and installing. Refer to SUPERCHARGER RIBBED BELT TENSIONER, REMOVING AND INSTALLING .
- Bolt
- 40 Nm