Ribbed Belt TENSIONER, Removing And Installing, Vehicles With Hydraulic Power Steering: Removing

Fig 1: Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1- upward.

-- Remove the bolt -2- on the left front coolant pipe.

Fig 2: Coolant Pipes

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The installation location is shown with the engine removed.

Ignore item -1-.

-- Remove the front noise insulation -1-. Refer to Front Noise Insulation Removing And Installing .

Fig 3: Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

Vehicles with Left Front Coolant Pipes, Version 1

Fig 4: Identifying Hose Clamps -1 And 3- & Left Front Coolant Hose

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2- on the left front coolant pipes.

NOTE:

The installation location is shown with the engine removed.

Ignore items -1 and 3-.

Vehicles with Left Front Coolant Pipes, Version 2

Fig 5: Locating Lower Coolant Pipe Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- for the left front coolant pipes.

NOTE:

The installation location is shown with the engine removed.

Ignore the -arrows-.

Continuation for All Vehicles

Fig 6: Releasing Belt Tension

Courtesy of AUDI OF AMERICA, LLC

-- Pivot the tensioner clockwise in direction of -arrow- to release the tension on the ribbed belt.

-- Remove the ribbed belt from the tensioning element and release the tension on the tensioning element.

-- Remove the cover -1- and the bolt below it.

Fig 7: Identifying Cover -1- And Ribbed Belt Tensioner -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt tensioner -2- from the cylinder block.