Supercharger Ribbed Belt, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Supercharger Ribbed Drive Belt Routing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Place the ribbed belt over the pulley as illustrated:

Tensioner
Supercharger
Idler Roller
Vibration damper

NOTE:

When installing the ribbed belt, make sure it is seated correctly on the pulleys.

-- Start the engine and check the belt routing.

-- Install the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Install the noise insulation, refer to FRONT NOISE INSULATION .