LEFT RETAINING PLATE WITH Footwell Door Motor -V261-, REMOVING AND INSTALLING: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

The Footwell Door Motor -V261- is installed on vehicles equipped with the "Basis" A/C system.

NOTE:

The retaining plate with the Footwell Door Motor -V261- is only installed on vehicles equipped with the "Basis" A/C system.

Retaining plate with the Footwell Door Motor -V261-, disassembling and assembling. Refer to LEFT RETAINING PLATE WITH Footwell Door Motor -V261-, DISASSEMBLING AND ASSEMBLING .

Currently in this vehicle, all actuators are identical in construction. During the basic setting, the actuators are assigned and adapted corresponding to the switching sequence of the wiring. If this sequence does not conform with the specification, the actuators will adapt incorrectly and the door control will be wrong. Refer to MAIN WIRING DIAGRAM FOR A/C SYSTEM ACTUATORS .

Depending on the production date, there are different versions of the levers and connecting elements on the A/C unit. At the start of production, the levers -A- were installed with a closed pin and the connecting rod -B-. In MY 2008, the levers -C- have a slotted pin and connecting rod -D-. When replacing, be sure to use the correct version. .

Fig 1: Air Conditioner, Levers And Connecting Elements

Courtesy of AUDI OF AMERICA, LLC