Turn signal/parking lamp bulb, replacing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove headlamp → Headlamps, removing and installing .

Fig 1: Identifying Bulb Holder

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Turn bulb holder - arrow - counter-clockwise and remove from housing.
Pull bulb out of bulb holder.

Installing

Install in reverse order of removal, noting the following:

CAUTION:

Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

Fit new bulb in housing.
Install headlamp Installing .