Fog lamp bulb, replacing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove fog lamp assembly → Fog lamp housing, removing and installing .
Fig 1: Disconnecting Electrical Connection At Bulb And Turning Bulb Counter-Clockwise To Remove From Housing
- Disconnect electrical connection - 1 - at bulb.
- Turn bulb counter-clockwise - arrow - and remove from housing.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
- Insert bulb and secure by turning in clockwise direction.
- Check and adjust fog lamps if necessary → 00 - TECHNICAL DATA .