Heating element for rear seat backrest, replacing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove cover and padding for rear seat backrest → Cover and padding for rear seat backrest, assembly overview .
- Cut area - A - out of old heating element - 3 -.
- Pull out cable - 1 -.
- Align new heating element on backrest cushion, remove the protective film and bond heating element firmly onto padded surface.
- Insert cable - 1 - into the intended gap - 2 -.