Removing and installing ISOFIX holder (front)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G 1410

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench V.A.G 1410

Remove front passengers seat → Seat, assembly overview (manual adjustment) or → Front seat, assembly overview (electrical adjustment).

Fig 2: Removing/Installing ISOFIX Holder (Front)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove upholstery from front passengers seat → Seat pan cover and padding (standard seat), removing and installing (manual adjustment) or → Cover and padding for seat pan (standard seat), assembly overview (electrical adjustment).
Remove bolts - 3 - (2x). Tightening torque 7 Nm
Remove ISOFIX holder - 2 -.

1 - Frame, front seat