Convertible top lock, removing and installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Front rail trim removed.
- Mark position of convertible top lock on front rail.
Fig 1: Removing Wire Bracket Retainer, Pressing Push Rod Off Ball Stud & Removing Bolts And Convertible Top Lock
- Remove wire bracket retainer and press push rod - 1 - off ball stud.
- Remove bolts - 2 - and remove convertible top lock.
Installation is reverse of removal.
Tightening torque → Attachments - assembly overview .