Convertible top compartment cover lock, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Convertible Top Compartment Cover Lock, Removing/Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

Bring convertible top into center position.
Remove convertible top compartment well front trim.
Mark position of Convertible Top Compartment Cover Locking Motor V222 before removal.
Remove securing spring from ball socket and press push rod of ball stud (version 1) or remove securing clips and press push rods from guide pins (version 2).

Disconnect electrical connector.

Fig 2: Identifying Screws

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screws - arrows -.
Remove Convertible Top Compartment Cover Locking Motor V222/Convertible Top Compartment Latch Switch (unlock) F293.

Installing

Secure motor according to markings applied earlier and tighten bolts.

Tightening torque → Convertible top compartment cover latch - assembly overview .