Shift mechanism (through VIN 8E_6A156499,), assembly overview

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Lubricate bearing areas and slide surfaces with polycarbamide grease G 052 142 A2 .

Fig 1: Shift Mechanism (Through VIN 8E_6A156499,), Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Shift mechanism bottom cover

2 - Bracket

For selector lever

3 - Bushing

4 - Tiptronic locking lever

5 - Pivot pin

6 - Selector lever

7 - Shift lock solenoid N110

→ Shift Lock Solenoid N110 (through VIN 8E_6A156499), removing and installing

8 - Operating lever for locking cable

9 - Lock for locking cable

10 - Lever for locking cable

11 - Locking lever

12 - Shift lever guide

NOTE:

If selector lever guide or shift unit is faulty, entire shift mechanism must be replaced. It is not possible to adjust both components using shop equipment.

13 - Nut

10 Nm

14 - Shift unit

15 - Bushing

16 - Retaining bracket for selector lever

17 - Retaining clip

18 - Tiptronic locking lever

19 - Pivot pin

20 - Nut

10 Nm