Shift Lock Solenoid N110 (through VIN 8E_6A156499), removing and installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove cover for shift mechanism → Shift mechanism cover (through VIN 8E_6A156499), removing and installing .
Disconnect electrical harness connector on Shift Lock Solenoid N110.

Fig 1: Releasing Lugs And Removing Shift Lock Solenoid Forward

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Release lugs and remove shift lock solenoid forward - arrows -.

Installing

Installation is in reverse order of removal, note the following:

Fig 2: Pressing Selector Lever Lock Solenoid Into Guide Until It Engages

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.
Install cover for shift mechanism → Shift mechanism cover (through VIN 8E_6A156499), removing and installing .