Shift mechanism cover (through VIN 8E_6A156499), removing and installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove selector lever handle → Selector lever handle (through VIN 8E_6A156499), removing and installing .
- Open ashtray in center console and remove trim panel - arrows -.
- Remove 2 retaining bolts for ashtray and lift ashtray at rear.
- Release all 4 clips - arrows - and pull cover - 1 - with guide upwards to remove.
- Disconnect connector from side of guide plate.
Installing
Installation is in reverse order of removal, note the following:
- Install selector lever handle → Selector lever handle (through VIN 8E_6A156499), removing and installing .