Pedal cluster, assembly overview

WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pedal Cluster, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Mounting bracket

Removing and installing. Refer to Master cylinder, removing and installing

2 - Mounting pin for clutch and brake pedal

3 - Locking element

4 - Hex socket-head bolt, 25 Nm

5 - Brake pedal

Attachment maintenance-free, do not lubricate

6 - Clutch pedal switch

Do not install more than one time

Fig 2: Pedal Cluster, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

7 - Hex socket-head bolt, 5Nm

For securing mounting pin for clutch and brake pedal

8 - Clutch pedal

Removing and installing. Refer to Master cylinder, removing and installing

9 - Locking element

10 - Mount

Removing and installing. Refer to Hydraulic system, component overview

11 - Hex socket-head bolt, 20Nm

12 - Master cylinder

Removing and installing. Refer to Master cylinder, removing and installing
Do not remove gasket (arrow)

Fig 3: Pedal Cluster, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

13 - Over-center spring

Black side facing clutch pedal
Removing and installing. Refer to Over-center spring, removing and installing
Assignment

14 - Clutch pedal starter interlock switch -F194-

Do not install more than one time

15 - TORX bolt, 25 Nm

For attaching brake master cylinder/brake booster to mounting bracket