Electromechanical Power Steering Gear With Tie Rods Overview
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Electromechanical Steering Gear with Tie Rods
- With Power Steering Control Module -J500-.
- Removing and installing, refer to STEERING GEAR .
- Servicing, refer to ELECTROMECHANICAL POWER STEERING GEAR OVERVIEW .
- Different versions, refer to the Parts Information.
- Bolt
- 80 Nm + 180° turn
- Always replace if removed.
- Subframe
- Nut
- Pushed into the subframe.
- Always replace if removed.
- Steering Intermediate Shaft
- Bolt
- 30 Nm + 90° turn
- Always replace if removed.
- The threaded hole for the bolt must always be cleaned (for example, using a thread tap).
- Wheel Bearing Housing
- Nut
- 100 Nm
- Always replace if removed.