Charge Air Pressure Sensors - G31- And - G447-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - SUPERCHARGER .

Install in reverse order of removal while noting the following:

NOTE:

Replace the self-locking screws and the O-ring.

Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.