LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> Tail Lamps >> Tail Lamp, Removing And Installing >> Outer Tail Lamp, Removing And Installing, Led Through My 2012 >> Installing

Outer Tail Lamp, Removing And Installing, Led Through My 2012: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

The Self-Adhesive Seal On The Tail Lamp Housing Must Seal Correctly.

-- Position the tail lamp on the body and press the retaining pins into the holes.

-- Tighten the threaded pins.

scientia non olet · About LEMON Manuals