LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> Headlamps >> Headlamp Housing Mount Bracket, Removing And Installing >> Installing

Headlamp Housing Mount Bracket, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Housing Mount Bracket
GWWA94-11328Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following: 

-- Install The Bracket To The Fender And To The Lock Carrier And Bolts -1, 2, 3- By Hand.

-- Install The Headlamp Washer System Spray Nozzle. Refer To SPRAY NOZZLES, REMOVING AND INSTALLING, ALL AUDI A5 MODELS, AUDI RS 5 . Audi RS 5 From MY 2012, USA From MY 2013. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING, AUDI RS 5, .

-- Install The Front Bumper Cover. Refer To FRONT - BUMPER COVER, REMOVING AND INSTALLING .

-- Align The Bumper Cover Gaps According To The Body Contours.

-- Tighten The Bolts.

-- Inspect The Gaps Again And Repeat The Adjustment If Necessary.

-- Install The Headlamp Housing:

-- Adjust The Headlamp. Refer To HEADLAMP, ADJUSTING .