OVERVIEW - HEADLAMP HOUSING MOUNT, Through MY 2012

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Headlamp Housing Bracket And Mount - Vehicles Through MY 2011

Courtesy of AUDI OF AMERICA, LLC

Headlamp Washer System Spray Nozzle
Mount
- For Headlamp Washer System Washer Fluid Line
Screw
- 8 Nm
Bracket
- For the headlamp housing mount
- Removing and installing. Refer to HEADLAMP HOUSING MOUNT BRACKET, REMOVING AND INSTALLING .
Screw
- 8 Nm
Ventilation
- For the headlamp housing
Breather Hose
- For the headlamp housing
Screw
- 4.5 Nm
Spring Nut
Mount
- For the headlamp housing
- Removing and installing. Refer to HEADLAMP HOUSING MOUNT, REMOVING AND INSTALLING .
Screw
- 4.5 Nm
Screw
- Tightening Specification. Refer to COMPONENT LOCATION OVERVIEW - AIRBAG CRASH SENSORS .
Front Airbag Crash Sensor
- Removing And Installing. Refer To DRIVER SIDE AIRBAG CRASH SENSOR -G179- / FRONT PASSENGER SIDE AIRBAG CRASH SENSOR -G180-, REMOVING AND INSTALLING / DRIVER FRONT AIRBAG CRASH SENSOR -G283-, REMOVING AND INSTALLING .