Overview - Seat Bench/Single Seat, One Piece Bench Seat With Center Storage Compartment

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The One Piece Bench Seat With Center Storage Compartment Is Special Equipment And Is Only Installed On Vehicles With Super Sport Front Seats.

Fig 1: Identifying One Piece Bench Seat, With Center Storage Compartment Overview

Courtesy of AUDI OF AMERICA, LLC

Bench Seat
NOTE:
The Wire Frame Of The Bench Seat Must Be Checked After Every Disassembly Of The Bench Seat And Be Readjusted In The Case Of Deformation.
- One piece
- Removing and installing. Refer To SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
- Check and readjust the wire frame. Refer To FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING
LATCH Child Seat Anchorage Cover
- Equipment levels
- Quantity: 4
- Clipped to the LATCH child seat anchorage brackets that are welded to the floor
Center Storage Compartment
- Removing and installing. Refer To CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .
Mounting Grommet
NOTE:
Replace The Mounting Grommets Each Time The Bench Seat Is Removed.
- Quantity: 2
- For securing bench seat
- Clipped into the vehicle floor
- Removing and installing. Refer To SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING or REMOVE MOUNTING GROMMETS -2- FROM THE BODY OPENING AND THROW AWAY. .
Vehicle Floor
NOTE:
The floor panel into which the mounting grommets are inserted must be checked after every disassembly of the bench seat and be readjusted in the case of deformation.
- Check and readjust the floor panel. Refer To FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING