Upper Toothed Belt Guard, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
-- Install the Reducing Agent Injector -N474-. Refer to Reducing Agent Injector -N474-, REMOVING AND INSTALLING .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Bleed the fuel system. Refer to FUEL SYSTEM, FILLING/BLEEDING .
Tightening Specifications:
- Refer to OVERVIEW - EXHAUST TEMPERATURE REGULATION
- Differential pressure sensor control line to toothed belt guard. Refer to OVERVIEW - TOOTHED BELT GUARD .
- Fuel Filter; Overview - Fuel Filter. Refer to OVERVIEW - FUEL FILTER .
- Refer to Fig 1