Overview - Toothed Belt Guard
- Lower Toothed Belt Guard
- Removing and Installing. Refer to LOWER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
- Bolt
- with collar
- mounted permanently in the lower toothed belt guard
- 12 Nm
- Bracket
- for coolant lines
- Bolt
- 5 Nm
- Pipe
- To the Differential Pressure Sensor -G505-
- Clip
- Bolt
- 5 Nm
- Bracket
- For the coolant lines and the reducing agent delivery line
- Heat Shield
- Bolt
- 5 Nm
- Bracket
- For the measuring tube
- Upper Toothed Belt Guard
- Removing and Installing. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
- Bolt
- Insert with locking fluid. Refer to the Parts Information.
- 12 Nm
- Rear Toothed Belt Guard
- For the removal, remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .