Bearing Bracket, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the bolts -arrows- and tighten them. Tightening specifications -item 4- OVERVIEW - CYLINDER HEAD.
-- Lubricate the hole -arrow- with engine oil.
-- Attach the bearing mount and install the bolts -arrows- all the way by hand.
-- Depending on the version, remove either the :T40011 or the :T40267 .
-- Tighten the bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAINS .
Installation is performed in reverse order of removal, noting the following:
-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .
There are additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .