LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing 6-Speed Dual-Clutch Transmission 0D9 (1 Of 2) >> 34 Controls, Housing >> Bevel Box >> Bevel Box, Installing

Bevel Box, Installing

Procedure 

Install in reverse order of removal. Note the following:

CAUTION:

Risk of damaging sealing ring between transmission and bevel box.

  • Place bevel box on transmission together with right flange shaft while turning shaft.

-- Tighten bevel box on transmission.

-- Install the driveshaft. Refer to DRIVESHAFT, REMOVING AND INSTALLING .

-- Check the gear oil level. Refer to GEAR OIL, CHECKING LEVEL .

scientia non olet · About LEMON Manuals